Welcome to the application guide for Pro Plus. This page will walk you through the coating process step by step. Please take your time and follow the instructions carefully to ensure the best results. When you’re done, scroll down to mark the coating as complete and leave a review to earn points for discounts on future purchases.
Undrdog Pro Plus: Elite Auto Coating
More about Undrdog Pro Plus: Elite Auto Coating
Introducing Undrdog Pro Plus, the zenith of our protective coating technology. Crafted with precision for professional detailers, Pro Plus sets a new benchmark in automotive care. It's not just an evolution; it's a revolution in surface protection, offering double the chemical resistance, increased slickness, enhanced hydrophobicity, and a depth of gloss that transforms any vehicle into a masterpiece.
With our proprietary single-layer formula, Undrdog Pro Plus ensures a seamless application while delivering a protective prowess unmatched by traditional coatings. Its rapid flash time is a testament to its efficiency and potency, designed with the professional in mind for a swift and stunning finish. This elite coating boasts a 24-hour dry time and a 5-day cure period, locking in a level of durability and shine that stands the test of time.
Key Features:
- Double Chemical Resistance: A formidable barrier against harsh elements.
- Elevated Slickness: A smoothness that must be felt to be believed.
- Superior Hydrophobicity: Water beads and rolls off with ease.
- Enhanced Gloss & Depth: Visually stunning reflections and rich color saturation.
- Professional Precision: Optimized for experienced detailers seeking unparalleled results.
Undrdog Pro Plus is more than a product; it's a commitment to excellence, designed for those who demand nothing but the best. Embrace the future of detailing with Pro Plus - where technology meets artistry.
Instructions
What’s Needed
- Brand new microfiber towels
- Applicator pads
- Wax & grease remover or denatured alcohol
- Adequate lighting
- Timer
- Gloves
- Face Mask
Installing Undrdog Pro Plus is pretty straightforward. Let’s go through the steps.
To Start
1- First, prep the surface. Wipe it with denatured alcohol or a body shop wax & grease remover using fresh microfiber towels. Once finished you may begin coating.
2- Drip as many drops of Undrdog Pro Plus as it takes to get your applicator pad fairly saturated (generally ±30). Apply more product to the pad as needed throughout the process to maintain an even coating.
3- To begin, apply the coating to one panel in a cross-hatch (#) motion. This means moving the applicator pad in a vertical and then horizontal motion to ensure total coverage.
4- Once the area is coated, wait 1-3 minutes before using fresh microfiber towels to buff away the residue. We recommend the three-towel method for this process - if you’re a pro, you know.
5- Allow the coating to dry for 2-5 hours before delivering the vehicle to your client.
For detailed instructions on how to install Undrdog Pro+, check out this article.
Immediate Aftercare
The vehicle should remain dry for at least 24 hours after coating installation and not be washed with strong detergents for at least 5 days. Once the curing process is complete, use a PH-balanced soap for stripping dirt and grime to maintain the coating.
Important: Be advised, using Undrdog Pro + requires previous experience with coating installation.
What’s Needed
- Brand new microfiber towels
- Applicator pads
- Wax & grease remover or denatured alcohol
- Adequate lighting
- Timer
- Gloves
- Face Mask
Installing Undrdog Pro Plus is pretty straightforward. Let’s go through the steps.
To Start
1- First, prep the surface. Wipe it with denatured alcohol or a body shop wax & grease remover using fresh microfiber towels. Once finished you may begin coating.
2- Drip as many drops of Undrdog Pro Plus as it takes to get your applicator pad fairly saturated (generally ±30). Apply more product to the pad as needed throughout the process to maintain an even coating.
3- To begin, apply the coating to one panel in a cross-hatch (#) motion. This means moving the applicator pad in a vertical and then horizontal motion to ensure total coverage.
4- Once the area is coated, wait 1-3 minutes before using fresh microfiber towels to buff away the residue. We recommend the three-towel method for this process - if you’re a pro, you know.
5- Allow the coating to dry for 2-5 hours before delivering the vehicle to your client.
For detailed instructions on how to install Undrdog Pro+, check out this article.
Immediate Aftercare
The vehicle should remain dry for at least 24 hours after coating installation and not be washed with strong detergents for at least 5 days. Once the curing process is complete, use a PH-balanced soap for stripping dirt and grime to maintain the coating.
Important: Be advised, using Undrdog Pro + requires previous experience with coating installation.
Done Coating?
Congratulations on completing your coating! Now, we’d love to hear your feedback. Your review helps us improve and helps others choose the right products. Plus, as a thank-you, you’ll earn loyalty points to redeem for discounts on your next order.
Leave a Review