Undrdog Wholesale is here! Get up to 45% off on bulk orders! Register now for free.
Undrdog Marine (100ml) is the best professional grade protective coating for all kinds of boats and vessels. It is based on Polytetrafluoroethylene - (C2F4)n, Silicon and Paraffin. It might sound like a mouthful, but rest assured that these compounds together are what's making Undrdog Marine better, cleaner and stronger.
Each one of these three main ingredients are incredibly resistant to chemicals, UV rays from the Sun, oxidizers, external contaminants, heat and water spots (something ceramic coatings have trouble contending with). However, combined together in Undrdog Pro, these three ingredients create the trifecta of awesomeness: durability, performance and value.
This is what makes Undrdog Marine the new leading choice amongst the country's best professional marine detailers.
We at Undrdog are not in the market of selling buzz. We sell super efficient, affordable surface protection and cleaners. That’s why we decided to depart from the standard set of industry-specific buzzwords like “ceramic”, “graphene”, “titanium” and “nano”. We would even go a step further saying that none of those words mean anything in a protective coating and that these terms are just marketing gimmicks. Haven’t you asked yourself where’s ceramic in a ceramic coating? These are all bold buzzwords that give the illusion of durability - but are ultimately hollow and meaningless. Your coffee mug isn’t made from SiO2, is it? Nope… that’s because your coffee mug and toilet are actually ceramic. Let’s just call things what they are - protective coatings.
- water beading
I’ve been using Undrdog for 4 years. I really see great results.
User Friendly with Professional Results
Coating was great to work with, a little goes a long way. The results were fantastic and will for sure be ordering again.
- Brand new microfiber towels or terry cloth (at least 2)
- Applicator pads
- Wax and grease remover or denatured alcohol
- Adequate lighting.
- Face mask.
1- Prep the surface by wiping all surfaces with denatured alcohol or a body shop wax and grease remover. Be sure to use fresh clean towels. Once finished you may begin coating.
2- Prime your applicator pad by dripping 15-20 drops of Undrdog Marine onto the pad. You want the pad to be damp with product. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding Undrdog Marine to the pad, as needed, to maintain an even coating.
3- To begin, apply Undrdog Marine evenly to one panel. We suggest starting on the roof of the vessel and working your way to the hood and around the entire vessel.
4- Apply one panel at a time in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal motion to ensure complete and total coverage of each panel.
5- Complete as much as you can within a 7-10 minute time frame.
6- Once the area is coated and the product has flashed for no less than seven to ten minutes you may begin wiping. We suggest using at least three towels for this process and working one panel at a time in the order they were applied. Start with your first panel - use one towel to wipe off Undrdog Marine, one towel to buff off any remaining residue; and one as a final wipe down to insure no residue is left behind.
7- Repeat the step 6 until the entire vessel has been wiped and all the coating residue has been removed.
8- Check the boat for any residue and congratulate yourself for a job well done!
Applying Undrdog Marine to wood, leather and plastics:
1- Prime your application pad. Apply several drops of Undrdog Marine (15 – 20 drops) to your pad. Keep the pad damp by re-applying as needed throughout the coating process.
2- Apply Undrdog Marine evenly to all of the plastics, trimmings leather etc. Once the desired appearance is achieved do not touch for 24 hours.
Drying time and immediate after care:
Once you are done applying Undrdog Marine wait three hours for it to completely dry. Wait 24 hours before getting the boat wet. Do not wash with detergents for 1 week. Once a full week is up, use a PH balanced soap for striping dirt and grime to maintain your coating. Our Soap is perfectly compatible with all coatings.
For best results:
Aim to coat in a cool shaded area - but you can apply Undrdog Marine in direct sunlight. Make sure your environments temperature is above 45° and below 110° F when applying. Keep your area contamination-free. Use in well ventilated area, always wear gloves and face mask when working with chemicals.
Always store in a cool, dry location with the lid tightly closed.
Attention!For Best Results wear gloves, protective eye wear and a face mask. Apply the product in a well ventilated area.
Ingredients:Silicone, Bis-ethoxydiglycolcyclohexane 1,4 Dicarboxylate, PTFE, Paraffin Wax.
GHS Hazard Statements H315: Causes skin irritation [Warning Skin corrosion/irritation]
H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]
H331: Toxic if inhaled [Danger Acute toxicity, inhalation]
H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]
H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]
If medical advice is needed, have the product container or label at hand or refer to the website www.getundrdog.com. Keep out of reach of children. Wear protective gloves/ protective clothing/ eye protection/ face protection. Dispose of contents/container to comply with local, state and federal regulations.
First Aid:IF IN EYES, Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.