marine top.

$159.99

A highly durable, incredibly glossy protective coating designed to reduce maintenance for all painted, gelcoat, metal and plastic surfaces on your vessel. This product is a great stand-alone product lasting 12 – 18 months. When combined with our marine base. you can expect an enduring finish for 18 – 24 months. Achieve even more brilliance.

Scroll down for bulk pricing.

In stock

GTIN: 0051497132231 SKU: MT1 Category:

Description

A highly durable, incredibly glossy protective coating designed to reduce maintenance for all painted, gelcoat, metal and plastic surfaces on your vessel. This product is a great stand-alone product lasting 12 – 18 months. When combined with our marine base. you can expect an enduring finish for 18 – 24 months. Achieve even more brilliance.

Designed to enhance the appearance of your vessel and protect it from a multitude of environmental damages marine top. protects your boat from bugs, bird droppings, heavy detergents, sun damage, oxidation, minor scuff transfer, dirt, grime, marine growth and more. With hydrophobic self-cleaning and protective properties, cleaning is simple. Your boat, new or old, can be transformed, and we want to help.

As a stand-alone product, marine top. can last 12-18 months. When combined with marine base. you can get an incredible 18-24 months of protection, gloss and ease.

Coverage: One bottle will cover 24 ft. boats an average of 1-2 times. This means up to two layers for the average 24 – 30 ft boat. For best results, aim to apply two layers of marine top.

Bulk pricing:

From 5 to 9 ordered: get each for $144.99.

Order 10+: get each for $139.99.

Additional information

Weight1.23 lbs
Dimensions5 × 5 × 8 in
Volume

100 ml

Instructions

At undrdog, we want your boat to look it’s very best for as long as you want it. So we want you to have every tool and resource to get your boat coated with expert care. We will walk you through it.

What you need to get started:

  1. Brand new microfiber towels (at least 3)
  2. Applicator pads
  3. Wax and grease remover (alcohol and water solution)
  4. Bottle of marine top.
  5. Our undrdog soap. or other safe degreasing soap like Dawn
  6. Adequate lighting
  7. Timer

Application instructions:

To prepare your boat, ensure it is washed and the contamination is removed (polish if needed). For coating see instructions below:

  1. Remove wax and grease (An alcohol and water solution is excellent at the removal of all residue, wax and grease).
  2. After prepping your boat, start a timer for 5 – 7 minutes. 
  3. Prime your applicator pad by dripping 10 – 15 drops of marine top. onto the pad, or until damp but not wet. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding marine top. to the pad, as needed, to maintain an even coating. 
  4. To begin, apply marine top. evenly to one 3×3 ft. section.
  5. Apply one section at a time in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal wiping motion to ensure complete coverage of each panel before moving to the next.
  6. Complete as many 3×3 sections as possible in 5 – 7 minute intervals. Finish coating your final section before the timer goes off. 
  7. Once the timer goes off, take three clean microfiber towels and, starting with the first section you coated, use one towel to wipe off the marine top. solution; One to buff off the remaining residue; One as a final wipe down.
  8. Repeat step 7 for every section, using the same towel for each step. Always check for any missed residue or dark spots.
  9. Repeat steps 1 – 7 until the entire boat is coated, wiped and buffed.
  10. Once you have coated the full boat, wait one hour.

Drying time and immediate after care:

Once you are done applying every layer of your ceramic coating (marine base. and marine top.) wait three hours for it to completely dry. Wait 24 hours before getting your boat wet. Do not wash with detergents for 1 week. Dry off your boat with clean microfiber towels for the first week whenever your boat gets wet. Once a full week is up, use a PH balanced soap for striping dirt and grime that could block the coatings hydrophobic value. Our undrdog soap. is perfectly compatible with ceramic coatings.

Important:

Always throw away your microfiber towels after using them for a ceramic coating. 

For best results:

Aim to coat in a cool shaded area but you can apply marine top. in the direct sun too! Make sure your environment temperature is 45° – 110° F. Keep your area contamination free.

Storage:

Always store in a cool, dry location with the lid tightly closed.  

Ingredients and Safety

ingredients.

Alkyl silicone resin: Resin; Isononane: Solvent; Silicone dioxide: Hydrophobing agent

warning!

H226: Flammable liquid and vapour. H302: Harmful if swallowed. H319: Causes serious eye irritation. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. 

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Use personal protective equipment as required. Dispose of contents/container to comply with local, state and federal regulations. 

First Aid: IF SWALLOWED, Immediately call a POISON CENTER or doctor/ physician. Do NOT induce vomiting. IF IN EYES,  Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In Case of Fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.

Download the Safety Data Sheet

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.