Undrdog Self Leveling Industrial

This product is in the final phase of Beta testing.

It can be used as an industrial/auto/ marine coating for coating all types of metal, heavy use surfaces, undercarriage and boat hulls.

Undrdog Industrial is perfect for protecting and enhancing non-floor surfaces like house hold items, heavy equipment, boat parts, car parts etc. This coating is meant to provide a durable, glossy, and protective finish. Here’s how to apply it using a microfiber applicator pad.

Materials and Tools Needed

• Undrdog Self Leveling Industrial (ready to use)
• Microfiber applicator pad
• Degreaser (recommended for surface preparation)
• Isopropyl alcohol (70-90%) or a similar surface cleaner
• Clean, lint-free cloths or towels
• Protective gear: gloves, goggles, and respirator (if in a poorly ventilated area)
• Masking tape (to protect surrounding areas)
• Level workspace for the object being coated
• UV curing light (if required by the product)

Step 1: Prepare the Surface

1. Wash the Surface with a Degreaser
• Use a high-quality degreaser to thoroughly clean the surface. This will remove grease, oil, dirt, and other contaminants that can affect adhesion.
• Rinse the surface with clean water to remove any residue from the degreaser. Allow it to dry completely.
2. Wipe with Isopropyl Alcohol
• After the surface is dry, wipe it down with isopropyl alcohol or a similar surface cleaner to remove any remaining residue and ensure it is spotless.
• Use a lint-free cloth to avoid leaving fibers behind.
3. Inspect the Surface
• Check for any remaining contaminants, imperfections, or dust. Address these before proceeding.
4. Mask Surrounding Areas
• Use painter’s tape to mask off edges or areas you don’t want coated. Press the tape down firmly to ensure clean lines.
5. Ensure a Level Surface
• Place the object on a level workspace to allow the coating to flow and settle evenly.

Step 2: Apply the Coating

The ceramic coating comes ready to use, so there’s no need for mixing.

• Pour a Small Amount
  • Pour a small amount of the coating directly onto the surface or onto the microfiber applicator pad.
• Spread with the Microfiber Applicator Pad
  • Use the microfiber applicator pad to spread the coating in straight, overlapping strokes. Work in thin, even layers for optimal results.
• Allow the Coating to Self-Level
  • Let the coating naturally flow and level itself. Avoid overworking the material, as this can disrupt its self-leveling properties.
• Inspect for Bubbles or Imperfections
  • Look for air bubbles or uneven spots. If bubbles appear, lightly pass the applicator pad over the area to break them.
• Wick Away Excess Coating
  • Use a lint-free cloth or the edge of the applicator pad to carefully remove any pooling along edges or corners.

Step 3: Curing the Coating

• Allow to Cure Naturally
  • Let the coating cure, typically 12-24 hours. Keep the area dust-free and undisturbed during this time.
• Optional UV Curing Light
  • Use a UV curing light to enhance curing. Follow the manufacturer’s guidelines for the correct distance and duration.

Step 4: Final Inspection and Care

• Inspect the Coating
  • Once the coating has fully cured, check for a smooth, glossy finish without imperfections.
• Initial Care
  • Avoid exposing the surface to heavy use, water, or harsh cleaners for the first 7 days to ensure full curing and optimal durability.

Pro Tips

• Work in a Dust-Free Environment: Dust can settle on the coating before it cures, so keep the workspace clean and enclosed if possible.
• Temperature and Humidity: Apply in a controlled environment with temperatures between 60°F–80°F and low humidity for the best results.
• Use Fresh Applicators: Always use a new microfiber applicator pad for each application to prevent contamination.

By following these steps, you’ll achieve a flawless, self-leveling ceramic coating that provides durable, long-lasting protection and an impressive finish.

Download MSDS here. 

Use this text to share information about your brand with your customers. Describe a product, share announcements, or welcome customers to your store.