Welcome to the application guide for Marine Plus. This page will walk you through the coating process step by step. Please take your time and follow the instructions carefully to ensure the best results. When you’re done, scroll down to mark the coating as complete and leave a review to earn points for discounts on future purchases.
Undrdog Marine Plus: Elite Coating for Professional Detailers
More about Undrdog Marine Plus: Elite Coating for Professional Detailers
Instructions
What’s Needed
- Brand new microfiber towels
- Applicator pads
- Wax & grease remover or denatured alcohol
- Adequate lighting
- Timer
- Gloves
- Face Mask
Installing Undrdog Marine + is pretty straightforward. Let’s go through the steps.
To Start
1- First, prep the surface. Wipe it with denatured alcohol or a body shop wax & grease remover using fresh microfiber towels. Once finished you may begin coating.
2- Drip as many drops of Undrdog Marine + as it takes to get your applicator pad fairly saturated (generally ±30). Apply more product to the pad as needed throughout the process to maintain an even coating.
3- To begin, apply the coating to one panel in a cross-hatch (#) motion. This means moving the applicator pad in a vertical and then horizontal motion to ensure total coverage.
4- Once the area is coated, wait 2-3 minutes before using fresh microfiber towels to buff away the residue. We recommend the three-towel method for this process - if you’re a pro, you know.
5- Allow the coating to dry for 2-5 hours before delivering the vessel to your client.
For detailed instructions on how to install Undrdog Marine+, check out this article. To get answers to frequently asked questions about our pro-grade boat coating, check out this one.
Immediate Aftercare
The vessel should remain dry for at least 24 hours after coating installation and not be washed with strong detergents for at least 5 days. Once the curing process is complete, use a PH-balanced soap for stripping dirt and grime to maintain the coating.
Important: Be advised, using Undrdog Marine + requires previous experience with coating installation.
What’s Needed
- Brand new microfiber towels
- Applicator pads
- Wax & grease remover or denatured alcohol
- Adequate lighting
- Timer
- Gloves
- Face Mask
Installing Undrdog Marine + is pretty straightforward. Let’s go through the steps.
To Start
1- First, prep the surface. Wipe it with denatured alcohol or a body shop wax & grease remover using fresh microfiber towels. Once finished you may begin coating.
2- Drip as many drops of Undrdog Marine + as it takes to get your applicator pad fairly saturated (generally ±30). Apply more product to the pad as needed throughout the process to maintain an even coating.
3- To begin, apply the coating to one panel in a cross-hatch (#) motion. This means moving the applicator pad in a vertical and then horizontal motion to ensure total coverage.
4- Once the area is coated, wait 2-3 minutes before using fresh microfiber towels to buff away the residue. We recommend the three-towel method for this process - if you’re a pro, you know.
5- Allow the coating to dry for 2-5 hours before delivering the vessel to your client.
For detailed instructions on how to install Undrdog Marine+, check out this article. To get answers to frequently asked questions about our pro-grade boat coating, check out this one.
Immediate Aftercare
The vessel should remain dry for at least 24 hours after coating installation and not be washed with strong detergents for at least 5 days. Once the curing process is complete, use a PH-balanced soap for stripping dirt and grime to maintain the coating.
Important: Be advised, using Undrdog Marine + requires previous experience with coating installation.
Done Coating?
Congratulations on completing your coating! Now, we’d love to hear your feedback. Your review helps us improve and helps others choose the right products. Plus, as a thank-you, you’ll earn loyalty points to redeem for discounts on your next order.
Leave a Review