Water Spot Remover

At Undrdog, we want your things to look their very best for as long as you own them. So we want you to have every tool and resource to get your car coated with expert care. We will walk you through it. 

What you need to get started:

1. A bottle of WSP
2. Clean microfiber towel or terry cloth (at least 2)
3. Water and a wet towel
4. Hose or sprayer for rinsing.

To get started, please use protective gear. Conduct a test in an inconspicuous area to ensure the color surface is safe to be treated with our water spot remover. For a surface with new water spots, mix at 1:1 solution of WSP to water. For stubborn water spots, use as is, without diluting. Shake the bottle well and drip contents onto a microfiber towel until damp but not dripping. Lightly buff the towel on the spotted and stained areas. Rinse the area well with water. Remove all residue after.

Storage:

Always store in a cool, dry location with the lid tightly closed.

INGREDIENTS

Water, Isopropyl alcohol, Polydimethyl siloxane, Citric Acid, Polyethylene Glycol Trimethylnonyl Ether, Fragrance, Colorant.

WARNING

H313: May be harmful in contact with skin. H316: Causes mild skin irritation. H320: Causes eye irritation.

Precautionary Statements:
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Wash thoroughly after handling.

If swallowed: Call a poison control center or doctor and rinse mouth.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if easy to do and continue rinsing. If eye irritation persists, get medical attention.

Store in a well-ventilated place. Keep container tightly closed.
Dispose of contents/container in accordance with local regulations.

Download the SDS sheet

What is Undrdog WSP good for?

Undrdog WSP is excellent for removing water spots from your vehicle's paint or glass. It can easily eliminate built up water spots from sprinklers, rain, sea air etc. If WSP doesn't do the trick you likely need to have the area polished or sanded to remove etching.

What is the difference between a water spot and water spot etching?

Great question, these oftentimes get confused as the same issue. The best way we have found to explain this is a water spot is the mineral build up on top of the paint. Water spot etching is the damage left behind by these minerals. Imagine a water spot being the high spot - like a mountain, and the etching being a low spot - like a canyon. Once etching occurs the only way to remove this is through polishing or wet sanding.

What happens if the WSP dries on my vehicle?

You are screwed. This time we mean it - do not let it dry on any surface on your vehicle. It can cause damage if left for too long on the right kind of paint or glass. To be safe, we suggest using this with two towels, one towel to apply the WSP, the other soaked with water to remove any WSP residue. We don't mean to scare you, we just want to inform you of the possible risk factors. As long as you follow the instructions and use this in the shade there should be no worries.

Can I use Undrdog WSP on matte or satin finishes?

Yes you can, our WSP is a great remover for all finishes.

Can I use Undrdog WSP on vinyl wraps?

Yes you can.

Do I really need to wear gloves and proper safety gear?

Yes, when working with any chemical including ours you should wear gloves and respiratory wear. No two bodies are alike and it is better to be safe than sorry.