How to Apply Undrdog Window Coating

Quick guide on how to apply Undrdog Window Coating to your boat

Undrdog Window Coating redefines the standard for glass care in both automotive and residential settings. Engineered with advanced technology, this easy-to-apply solution offers long-term benefits for all types of glass, ensuring your windows remain clear, clean, and protected under any condition.

What's Needed:

• Brand new microfiber towels
  

• Applicator pads

• Wax and grease remover or denatured alcohol

• Adequate lighting

• Timer

• Gloves

• Face Mask

Installation steps:

1. Prep the glass by wiping it with denatured alcohol or a body shop wax and grease remover. Be sure to use fresh, clean towels. Once finished, you may begin coating.

2. Prime your applicator pad by dripping 15-20 drops of Undrdog Window Coating onto the pad. You want the pad to be damp with the product. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding Undrdog to the pad, as needed, to maintain an even coating.

3. Apply the coating to the glass in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal motion to ensure complete and total coverage of each panel.

4. Complete as much as possible within a 5-7 minute time frame.

5. Once the area is coated and the product has flashed for no less than five to seven minutes, you may begin wiping. We suggest using at least three towels for this process. Use one towel to wipe off Undrdog Window Coating, one towel to buff off any remaining residue, and one as a final wipe-down to ensure no residue is left behind.

6. Check the surface for any residue and congratulate yourself on a job well done.

For best results:

Aim to coat in a cool shaded area - but you can apply Undrdog Window Coating in direct sunlight. Make sure your environment's temperature is above 45° and below 110° F when applying. Keep your area contamination-free. Use in a well-ventilated area, and always wear gloves and a face mask when working with chemicals.

Drying time and immediate after-care:

Once you are done applying Undrdog Window Coating, wait three hours for it to dry completely. Wait 24 hours before getting your glass wet. Do not wash with detergents for one week. 

Once a whole week is up, use a PH-balanced soap for striping dirt and grime to maintain your coating. Our Soap is perfectly compatible with all coatings. The most important thing besides washing your glass is drying! Always dry your vehicle after it gets wet.

Storage:

Always store in a cool, dry location with the lid tightly closed.