Window Coating: Ultimate Clarity & Protection

Quick guide on how to apply Undrdog Window Coating to your boat

Undrdog Window Coating redefines the standard for glass care in both automotive and residential settings. Engineered with advanced technology, this easy-to-apply solution offers long-term benefits for all types of glass, ensuring your windows remain clear, clean, and protected under any condition.

What's Needed:

• Brand new microfiber towels
  

• Applicator pads

• Wax and grease remover or denatured alcohol

• Adequate lighting

• Timer

• Gloves

• Face Mask

Installation steps:

1. Prep the glass by wiping it with denatured alcohol or a body shop wax and grease remover. Be sure to use fresh, clean towels. Once finished, you may begin coating.

2. Prime your applicator pad by dripping 15-20 drops of Undrdog Window Coating onto the pad. You want the pad to be damp with the product. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding Undrdog to the pad, as needed, to maintain an even coating.

3. Apply the coating to the glass in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal motion to ensure complete and total coverage of each panel.

4. Complete as much as possible within a 5-7 minute time frame.

5. Once the area is coated and the product has flashed for no less than five to seven minutes, you may begin wiping. We suggest using at least three towels for this process. Use one towel to wipe off Undrdog Window Coating, one towel to buff off any remaining residue, and one as a final wipe-down to ensure no residue is left behind.

6. Check the surface for any residue and congratulate yourself on a job well done.

For best results:

Aim to coat in a cool shaded area - but you can apply Undrdog Window Coating in direct sunlight. Make sure your environment's temperature is above 45° and below 110° F when applying. Keep your area contamination-free. Use in a well-ventilated area, and always wear gloves and a face mask when working with chemicals.

Drying time and immediate after-care:

Once you are done applying Undrdog Window Coating, wait three hours for it to dry completely. Wait 24 hours before getting your glass wet. Do not wash with detergents for one week. 

Once a whole week is up, use a PH-balanced soap for striping dirt and grime to maintain your coating. Our Soap is perfectly compatible with all coatings. The most important thing besides washing your glass is drying! Always dry your vehicle after it gets wet.

Storage:

Always store in a cool, dry location with the lid tightly closed.

What is Undrdog Window Coating good for?

Undrdog Window Coating is a multifaceted solution designed for maximum clarity, hydrophobicity, and protection. It offers advanced hydrophobic properties for effortless cleaning and drying and a significant reduction in water spots, keeping windows pristine.

Is the Window Coating like a ceramic coating?

Yes, it's similar: it beads water, it is glossy and it offers protection from the elements. However, as we listen to the market and adapt to fix the most critical pain points, we make it way easier to install, which in turn makes it more affordable for both the installer and the customer.

How difficult is it to apply Undrdog Window Coating?

Undrdog Window Coating is one of the easiest, if not the easiest, glass coating to apply on the market today. With a slow flash time and weather-tolerant composition, it makes applying this single-layer coating a breeze.

What happens if it rains immediately after I coat my vehicle?

Things happen - if it rains on your vehicle within 24 hours of having it coated, you should dry your car with soft microfibers as soon as it stops. Be conscious of damages. 95% of the time no damages occur, but in the event they do, you can apply another layer. The best thing to do of course is keeping it out of the rain while your coating dries.

How often do I have to reapply this coating?

Undrdog Window Coating should be reapplied yearly. 

Is there specific maintenance that I need to keep doing or is it just set-it-and-forget-it?

It can definitely be a set-it-and-forget-it, however, to get the maximum performance and longevity, the following is recommended:

1. Regular car washes with our Soap and a soft wash mitt.
2. Regular usage of our Quick Detail, a product that can add some slickness and hydrophobicity for those looking to get the most out of their coating.

What happens if I no longer want the coating on my vehicle?

You are stuck with it forever! Joking aside, a quick polish will remove the coating. From there you can reapply the coating or carry on with raw, boring paint.

Do I need to be trained and certified to apply this coating?

No, of course not! That's another perk of Undrdog, we listened to the market and made an easy-to-apply and highly effective single-layer coating that just about anyone can do. One of many ways we are saving you money and time.

Can I apply wrap or stickers over the coating?

Typically not, because the coating has anti-stick properties, and it's typical for wraps or stickers to delaminate if applied over the coating. We recommend getting your wrap or stickers applied before applying Undrdog Window Coating.

Do I really need to wear gloves and proper safety gear?

Yes, when working with any chemical including ours you should wear gloves and respiratory wear. No two bodies are alike and it is better to be safe than sorry. 

What is the shelf life of the Undrdog Window Coating?

If stored in a cool, dry location with the lid tightly closed, an unopened bottle can last up to 2 years while an open bottle lasts up to a year.