What’s Needed
- Brand new microfiber towels
- Applicator pads
- Wax & grease remover or denatured alcohol
- Adequate lighting
- Timer
- Gloves
- Face Mask
Installing Undrdog Pro Plus is pretty straightforward. Let’s go through the steps.
To Start
1- First, prep the surface. Wipe it with denatured alcohol or a body shop wax & grease remover using fresh microfiber towels. Once finished you may begin coating.
2- Drip as many drops of Undrdog Pro Plus as it takes to get your applicator pad fairly saturated (generally ±30). Apply more product to the pad as needed throughout the process to maintain an even coating.
3- To begin, apply the coating to one panel in a cross-hatch (#) motion. This means moving the applicator pad in a vertical and then horizontal motion to ensure total coverage.
4- Once the area is coated, wait 1-3 minutes before using fresh microfiber towels to buff away the residue. We recommend the three-towel method for this process - if you’re a pro, you know.
5- Allow the coating to dry for 2-5 hours before delivering the vehicle to your client.
For detailed instructions on how to install Undrdog Pro+, check out this article.
Immediate Aftercare
The vehicle should remain dry for at least 24 hours after coating installation and not be washed with strong detergents for at least 5 days. Once the curing process is complete, use a PH-balanced soap for stripping dirt and grime to maintain the coating.
Important: Be advised, using Undrdog Pro + requires previous experience with coating installation.
Who Is Undrdog Pro+ Good For?
Undrdog Pro+ is a product we strongly recommend for seasoned installers and auto shops only. If you’re a weekend warrior or car enthusiast, Undrdog Pro or Undrdog Coating will be a better fit for you.
How Difficult Is It To Install Undrdog Pro+?
We stuck with our single-layer methodology to ensure efficient installation. However, the mean protective punch that Pro+ provides comes with a shorter flash time that only pros can handle.
How Long Does It Take To Install Undrdog Pro+?
The average installation time is between 45 and 90 minutes. Then the product needs a couple of hours to cure, and you’re done!
What Surfaces Can I Apply Undrdog Pro+ To?
Undrdog Pro+ protects all surfaces including leather, plastics, metal, and glass. The only thing you should stay away from are fabrics.
Note: keep in mind that the coating lasts significantly less on glass than on other materials.
Can I Install Undrdog Pro+ On Vinyl, Matte & Satin Finishes?
Yes, yes, and yes! Undrdog Pro+ absorbs into vinyl and protects it from stains and fading. As for matte and satin paint finishes, it enriches them without making them glossy!
What Happens If It Rains Immediately After Installation?
Things happen. If it rains on your vehicle within 24 hours of having it coated, dry the surface with soft microfibers as soon as it stops. This will prevent the occurrence of water spots and any potential damage to the coating. 95% of the time no damages occur, but in the event they do, you can apply another layer.
How Long Will My Car Be Protected?
With proper maintenance, Pro+ can easily last multiple years. However, you can expect a reduction in longevity if the coating is neglected or maintained using improper aftercare methods.
How Do I Maintain Undrdog Pro+?
To get the maximum performance and longevity, the following is recommended:
- Regular car washes with our Soap and a soft wash mitt.
- Regular usage of our Quick Detail, a product that can add some slickness and hydrophobicity for those looking to get the most out of their coating.
How Can I Remove Undrdog Pro+?
A quick polish will remove the coating. From there you can reapply the coating or carry on with raw, boring paint.
How Does Undrdog Pro+ Compare To Undrdog Pro?
Both Undrdog Pro and Undrdog Pro+ are based on Polytetrafluoroethylene - (C2F4)n, Silicon, and Paraffin to create the trifecta of awesomeness: durability, performance, and value. So the difference between them isn’t the chemical composition itself - it’s the ratio of ingredients.
The concentration of silicon (the “ceramic” in ceramic coatings) is higher in Undrdog Pro+. Because of this, Undrdog Pro+ is more durable, provides better chemical resistance, boats higher hydrophobicity, more gloss, and extra paint saturation, as well as slickness!
What Is The Shelf Life Of Undrdog Pro+?
If stored in a cool, dry location, an unopened bottle of Undrdog Pro+ can last up to 2 years. An open bottle with the lid tightly closed lasts up to a year.
Do I Really Need To Wear Gloves And Proper Safety Gear?
Yes, when working with any chemical including ours you should wear gloves and respiratory wear. No two bodies are alike and it is better to be safe than sorry.
Get it between -
